|
| |
TM 5-2420-222-20-2
PARKING BRAKE LEVER AND LINKAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
21.
Brake rod (1) and
Pin (3)
Take out.
brake lever (2)
22.
Brake lever (2)
Brake rod (1)
Take off.
23.
Brake lever (2),
Button (6)
a.
Place brake lever (2) in machinist’s
spring (4), and
vise.
brake latch rod (5)
b.
Using slip-joint pliers and clean rag,
unscrew and take off.
24.
Brake lever (2) and
Spring (4)
Take out.
brake latch rod (5)
25.
Pin (7) and
Cotter pin (9)
a.
Using slip-joint pliers, straighten
brake latch (8)
ends and take out.
b.
Get rid of.
26.
Brake latch rod (5)
Cotter pin (10)
a.
Using slip-joint pliers, straighten
and brake latch (8)
ends and take out.
b.
Get rid of.
27.
Brake latch rod (5)
Brake latch (8)
Take off.
and pin (7)
28.
Brake lever (2)
Brake latch rod (5)
Take out.
CAUTION
Do not remove brake lever pin or sleeve bushing unless inspection shows need for replacement.
Removal may damage parts.
29.
Pin (7)
a.
Using 1/4-inch straight drive-pin
punch and 2-pound head ball-peen
hammer, drive out.
b.
Take brake lever (2) out of
machinist’s vise.
30.
Sleeve bushing (11)
Using 1.0625-inch outside diameter
remover and installer and arbor press,
press out.
2-860
|
