|
| |
TM 5-2420-222-20-2
TRANSMISSION OIL FILTER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
14.
Special capscrew (1)
Retainer (2)
Have assistant release.
with assembled parts
INSTALLATION
NOTE
If transmission oil filter was removed for access only, skip step 15.
15.
Cover (3) and
New element (4)
Put in position.
special capscrew (1)
16.
Cover (3)
New packing (5)
a.
Lubricate with hydraulic fluid.
b.
Place in position.
17.
Transmission
Cover (3) with
a.
Screw in and tighten until snug using
case (6)
assembled parts and
3/4-inch, 1/2-inch drive socket and
special capscrew (1)
ratchet handle.
b.
Using 3/4-inch, 1/2-inch drive socket
and 0 to 150 foot-pound capacity
torque wrench, tighten to 55 foot-
pounds (75 N•m) torque.
18.
Loader backhoe
Transmission
Fill (page 2-811).
19.
Engine
Start (TM 5-2420-222-10).
20.
Transmission
Cover (3) and
a.
Check for leaks.
case (6)
special capscrew (1)
b.
If leaking, shut down engine
(TM 5-2420-222-10) and replace
leaking packing or packings as
outlined in this task.
2-840
|
