|
| |
TM 5-2420-222-20-2
SPEED GEAR ASSEMBLY (REVERSER) CONTROL LEVER LINKAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
32.
Reverser
Control shaft
Put in place.
housing (1)
arm (2)
NOTE
Shaft on loader backhoes with Serial Numbers 235786 thru 235999 has seperate control lever arm. Shaft
on loader backhoes with Serial Numbers 319995 thru 342573 is one piece. Both are installed the same
way.
33.
Reverser housing (1)
Shaft (3 or 4)
Slide in.
and control shaft
arm (2)
34.
Shaft (3 or 4) and
Washer (5)
Put on.
reverser housing (1)
35.
Shaft (3 or 4)
Ring (6)
a.
Place in position.
and washer (5)
b.
Using slip-joint pliers, clamp shut.
36.
Shaft (3 or 4) and
Groove pin (7)
a.
Aline pin holes in shaft (3 or 4) and
control shaft arm (2)
arm (2).
b.
Using 1-pound head ball-peen hammer
and 1/8-inch straight drive-pin punch,
drive in.
37.
Shaft (3 or 4)
Control lever
Place in position.
rod (8) with
assembled parts
38.
Control lever
New cotter pin (9)
a.
Push in.
rod (8)
b.
Using slip-joint pliers, bend ends back.
39.
Clutch control
Yoke (11)
Place in position.
valve shaft (10)
40.
Clutch control
Headed pin (12)
Push in.
valve shaft (10)
and yoke (11)
41.
Headed pin (12)
Washer (13)
Put on.
42.
New cotter pin (14)
a.
Push in.
b.
Using slip-joint pliers, bend ends back.
2-822
|
