|
| |
TM 5-2420-222-20-2
BATTERY TRAY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Electrolyte and battery corrosion can cause injury. Wear safety goggles and
gloves. If for any reason electrolyte or battery corrosion contacts the eyes, skin, or
clothing, flush immediately with large amounts of cool water and seek medical
attention immediately.
1.
Battery tray (1)
Three screws (3)
a.
Using 9/16-inch, 3/8-inch drive
and transmission
and lockwashers (4)
socket, 3-inch extension, and ratchet
case (2)
handle, unscrew and take out.
b.
Get rid of lockwashers (4).
2.
Transmission
Battery tray (1)
Take off.
case (2)
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance
Instructions (page 2-137).
WARNING
Electrolyte and battery corrosion can cause injury. Wear safety goggles and
gloves. If for any reason electrolyte or battery corrosion contacts the eyes, skin, or
clothing, flush immediately with large amounts of cool water and seek medical
attention immediately.
3.
Battery tray (1)
a.
Using solution of 1/2-pound (0.28 kg)
sodium bicarbonate for each gallon
(38 liters) of water and floor scrub
brush, clean and flush until no
bubbles appear when new solution
is applied.
2-720
|
