|
| |
TM 5-2420-222-20-2
BATTERY STARTER CABLE
This task covers:
a.
Disconnection (page 2-710)
e.
Inspection/Replacement (page 2-714)
b.
Removal (page 2-712)
f.
Assembly (page 2-715)
c.
Disassembly (page 2-712)
g.
Installation (page 2-716)
d.
Cleaning (page 2-712)
h.
Connection (page 2-716)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Cleaner, battery terminal
Lockwasher, battery cable starter
Handle, ratchet, 3/8-inch drive
terminal nut
Puller, battery terminal
Rags, wiping (item 21, Appendix C)
Socket, 3/8-inch drive, 9/16-inch
Solvent, drycleaning (item 28, Appendix C)
Wrench, box, 1/2-inch
Tags, marking (item 30, Appendix c)
Wrench, box, 9/16-inch
Wrench, open-end, 1/2-inch
Personnel Required
Materials/Parts
One
Cleaning compound, solvent
Equipment Condition
(item 4, Appendix C)
Grease (LO 5-2420-222-12)
Battery ground cable disconnected
Lockwasher, battery cable clamp
(page 2-696)
screw (two required)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Battery starter cables for all loader backhoes are similar and are maintained the
same way. Battery starter cable for loader with Serial Numbers 319995 thru 342573
is shown.
DISCONNECTION
WARNING
Do not smoke, use open flame, or allow sparks near batteries. The mixture of
oxygen and hydrogen gases released from batteries is highly flammable and can
explode causing serious injury or death.
2-710
|
