|
| |
TM 5-2420-222-20-2
BATTERIES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
NOTE
For information on how to clean batteries and retaining parts, go to TM 9-6140-200-14.
INSPECTION/REPLACEMENT
NOTE
For inspection/replacement information on batteries and retaining parts, go to TM 9-6140-200-14.
INSTALLATION
WARNING
Do not smoke, use open flame, or allow sparks near batteries. The mixture of oxygen and
hydrogen gases released from batteries is highly flammable and can explode causing serious
injury or death.
Electrolyte and battery corrosion can cause injury. Wear safety goggles and gloves. If for any
reason electrolyte or battery corrosion contacts the eyes, skin, or clothing, flush immediately with
large amounts of cool water and seek medical attention immediately.
5.
Battery tray (1)
Right battery (2)
Set in place with negative terminal
toward front of loader backhoe.
6.
Left battery (3)
Set in place with positive terminal
toward front of loader backhoe.
7.
Two hook bolts (4)
Hook onto slots in tray (1).
8.
Two hook bolts (4)
Battery retainer (5)
Put on.
and batteries
(2 and 3)
CAUTION
Do not overtighten battery retainer nuts or battery cases may be damaged.
2-694
|
