|
| |
TM 5-2420-222-20-2
AC GENERATOR PULLEY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance
Instructions (page 2-137).
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and
gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and
clothes and don’t breathe vapors. Do not use near open flame or excessive heat.
The flashpoint is 100°F to 1380F (380 to 590C). If you become dizzy while using
cleaning solvent, get fresh air immediately and get medical aid. If contact with
eyes is made, wash your eyes with water and get medical aid immediately.
6.
All metal parts
a.
Clean in drycleaning solvent.
b.
Using clean, dry rags, wipe dry.
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance
Instructions (page 2-137).
Replace defective parts as needed.
7.
All metal parts
Look for cracks, breaks, and abnormal
bends.
8.
All threaded parts
Look for damaged threads.
INSTALLATION
NOTE
Steps 9 and 10 apply only if preparing exchange ac generator for installation.
9.
Rotor shaft (1)
Nut (2)
Unscrew and take off.
10.
Woodruff key (3)
Take off pressure sensitive tape.
11.
Woodruff key (3)
If removed, using 1-pound head ball-peen
hammer, tap into place.
2-450
|
