|
| |
TM 5-2420-222-20-2
FRONT LIGHTS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING - CONTINUED
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use
only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors.
Do not use near open flame or excessive heat. The flashpoint is 100°F to 138° (38° to 59°C). If you
become dizzy while using cleaning solvent, get fresh air immediately and get medical aid. If
contact with eyes is made, wash your eyes with water and get medical aid immediately.
14.
All other metal
a.
Clean in drycleaning solvent.
parts
b.
Using clean, dry rags, wipe dry.
15.
Bezel (1) and two
a.
Clean in solution of detergent and
grommets (2)
water.
b.
Rinse with clean water.
c.
Using clean, dry rags, wipe dry.
INSPECTIONIREPLACEM ENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-
137).
Replace defective parts which cannot be repaired.
16.
All metal parts
Look for cracks, breaks, and abnormal
bends.
17.
All threaded
Look for damaged threads.
parts
18.
Lamp (3)
Look for cracks, breaks, and loose
terminals.
19.
Bezel (1) and two
Look for cracks, tears, and crumbling.
grommets (2)
20.
Two leads (4 and 5)
a.
Look for cracked, burned, and worn
insulation.
b.
Look for broken wires.
c.
Look for loose, missing, and corroded
terminals.
2-652
|
