|
| |
TM 5-2420-222-20-2
WARNING LIGHTS
This task covers:
a.
Removal (page 2-626)
e.
Repair (page 2-630)
b.
Disassembly (page 2-625)
f.
Assembly (page 2-631)
c.
Cleaning (page 2-628)
g.
Installation (page 2-632)
d.
Inspection/Replacement (page 2-630)
INITIAL SETUP
Tools
Materials/Parts - Continued
File, thread restoring
Solvent, cleaning compound (item 27,
Knife, putty
Appendix C)
Screwdriver, flat-tip, 1/8-inch
Solvent, drycleaning (item 28, Appendix C)
Wrench, open-end, 9/16-inch
Tags, marking (item 30, Appendix C)
Materials/Parts
Personnel Required
Adhesive, metal bonding (item 1,
One
Appendix C)
Cleaning compound, solvent
Equipment Condition
(item 4, Appendix C)
Detergent, GP (item 7, Appendix C)
Battery ground cable disconnected
Lockwasher, warning light nut
(page 2-696)
Rags, wiping (item 21, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
NOTE
Both types of warning lights are maintained in similar way. One light of one type is shown.
Repeat procedures for other light as needed.
REMOVAL
NOTE
It is not necessary to remove warning light to disassemble it.
1.
Connector (1)
Connector (2)
a.
Tag (page 2-137).
b.
Unplug.
2.
Warning light (3)
Nut (5), lockwasher
a.
Using 9/16-inch open-end wrench,
and canopy roof (4)
(6), and washer (7)
unscrew and take off.
b.
Get rid of lockwasher(6).
2-626
|
