|
| |
TM 5-2420-222-20-2
LIGHT SWITCH - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance
Instructions (page 2-137).
Replace defective parts which cannot be repaired.
12.
All metal parts
Look for cracks, breaks, and abnormal
bends.
13.
Lever (1)
Look for cracks and breaks.
14.
All threaded
Look for damaged threads.
parts
REPAIR
15.
Light switch (2)
If threads are damaged, using thread
restoring file and screw threading set,
restore threads.
INSTALLATION
16. Cowl (3)
Light switch (2)
Put in place.
Make sure pin on switch goes into
hole in cowl.
17. Light switch (2)
New lockwasher (4)
Screw on and tighten using 5/8-inch open-
and cowl (3)
and nut (5)
end wrench.
18. Light switch (2)
Lever (1)
Put on.
19. Lever (1) and
New lockwasher (6)
Screw in and tighten using 3/16-inch flat-
light switch (2)
and screw (7)
tip screwdriver.
20. TL terminal (8)
Connector (9)
a.
Push on.
b. Take off tag.
21. FL terminal (10)
Connector (11)
a.
Push on.
b.
Take off tag.
22. B terminal (12)
Connector (13)
a.
Push on.
b.
Take off tag.
2-592
|
