 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-222-20-1
RADIATOR STRIPS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Do not remove packing strips unless inspection shows need for replacement. Removal may damage
parts.
NOTE
It may be necessary to remove radiator (page 2-371) to remove some packing strips.
WARNING
Water soluble cleaning compound solvent is flammable and fumes are toxic. Flashpoint is 2200F
(1040C). Boiling point is 2120F (1000C). Do not store in temperatures above 1500F (650C) or below
350F (20C). Do not use near open flame or excessive heat. Do not wear jewelry, wear rubber gloves and
goggles, and use only in well ventilated area. Avoid contact with skin, eyes, and clothes, and don't
breathe vapors. Avoid contact with acids, aluminium, or zinc; chemical reaction may result. If you
become dizzy while using cleaning compound solvent, get fresh air immediately and get medical aid. If
contact with eyes is made, wash your eyes with water and get medical aid immediately.
3.
Radiator (1)
Packing strip (2)
a. Using cleaning compound solvent dis-
solve adhesive and take off.
b. Using clean rag soaked in cleaning
compound solvent, remove all adhesive
from radiator (1).
c. Using clean rags dampened with clean
water, rinse radiator.
d. Using clean, dry rags, wipe dry.
INSTALLATION
4.
Radiator (1)
Packing strip (2)
a. If removed, apply metal adhesive in
0.06 to 0.18-inch (1.52 to 4.57 mm)
wide beads.
Make sure that outside beads are with-
in 0.25-inch (6.35 mm) of where
edge of strip will be.
b. Press against radiator (1) to transfer
some metal adhesive.
c. Take off and allow metal adhesive to
set for two minutes.
d. Press firmly Into place.
2-388
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals