 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-222-20-1
COOLING SYSTEM - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DRAINING - CONTINUED
NOTE
If loader backhoe is not equipped with engine coolant heater, skip steps 5 thru 7.
5.
Lower hose (1)
Clamp (2)
a. Put 5-gallon container underneath.
b. Using 3116-inch inch flat-tip screwdriver, loosen.
6.
Engine coolant
Lower hose (1)
a. Pull off.
heater (3)
with assembled
b. Drain coolant into 5-gallon container.
clamp (2)
c. Place in position.
7.
Lower hose (1)
Clamp (2)
Using 3/16-inch flat-tip screwdriver, tighten.
8.
Oil cooler (4)
Plug (5)
a. Put 5-gallon container underneath.
b. Using 5116-inch open-end wrench, unscrew and
take out.
c. Drain coolant into 5-gallon container.
d. Screw in and tighten using 5116-inch open-end
wrench.
e. Get rid of or save drained coolant (page 2-137).
CLEANING
9.
Cooling system
Clean (TM 750-254).
FILLING
10.
Engine
Radiator (6)
Fill with mixture of clean water and anti-
Compartment
freeze (TM 750-254).
Radiator should be filled to halfway point
between radiator core and filler neck.
2-354
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals