HAND THROTTLE LEVER AND CABLE ADJUSTMENT

TM 5-2420-222-20-1

HAND THROTTLE LEVER AND CABLE ADJUSTMENT - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

11.

Swivel (4) and

New cotter pin (6)

a. Place in position.

clip (5)

b. Using slip-joint pliers, bend ends back.

12.

Loader control

Throttle lever (2)

Push forward until it contacts stop (8)

box (1) and stop (8)

and note engine speed on tachometer (3).

Engine speed should be 2200 rpm.

NOTE

If engine speed is correct, skip steps 13 thru 15.

13.

Bracket (9) and

Two screws (10)

Using 7/16-inch open-end wrench,

stop (8)

loosen.

14.

Bracket (9) and

Stop (8)

a. If engine speed noted in step 12 was

two screws (10)

too low, move forward.

b. If engine speed noted in step 12 was

too high, move back.

2-313