FUEL INJECTION CAPS AND HOSES

TM 5-2420-222-20-1

FUEL INJECTION CAPS AND HOSES

This task covers:

a. Removal (page 2-206)

Inspection/Replacement (page 2-209)

b. Disassembly (page 2-208)

Assembly (page 2-210

c. Cleaning (page 2-208)

Installation (page 2-210)

INITIAL SETUP

Tools

Personnel Required

Wrench, open-end, 9/16-inch

One

Wrench, open-end, 5/8inch

Equipment Condition

Materials/Parts

1. Hood removed (page 2-1025)

Detergent, GP (item 7, Appendix C)

2. Battery ground cable disconnected

Rags, wiping (item 21, Appendix C)

(page 2-696)

Solvent, drycleaning

(item 28, Appendix C)

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

WARNING

No open flames, welding, grinding, smoking, or use of heat producing devices permitted near fuel tank

and fuel lines during maintenance unless the fuel tank has been cleaned and purged of all flammable

liquids and vapors. Fuel burns easily and fumes are explosive. Keep battery disconnected. Failure to

observe these precautions could cause serious injury.

Four caps (1 thru 4)

Four nuts (6)

Using 5/8-inch open-end wrench, un-

and nozzles (5)

screw all the way.

Cap (1) and

Nut (8)

Using 9/16-inch open-end wrench, un-

tube (7)

screw all the way.

Cap (1)

Tube (7) with

Take out.

assembled parts

Tube (7)

Nut (8) and

Slide off.

grommet (9)

Cap (4) and

Nut (11)

Using 9/16-inch open-end wrench, un-

tube (10)

screw all the way.

2-206