 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM5-241O-237-34
FRONT HOUSING COVERS - REPLACE/REPAIR (Cont'd)
3-20.
(10) Use a wrench to remove two
capscrews (23), two washers (24),
cover (25) and gasket (26) from
front housing cover (2). Discard
gasket.
(11) Use a wrench to remove six nuts
27), six washers (28), cover
29) and gasket (30) from front
housing cover (2).
(12) If necessary, remove six studs
(31) from front housing cover (2).
(13) Remove timing gears from the
engine. See page 3-108.
(14) Use a wrench to remove six
capscrews (32) and front housing
plate (6) from block assembly.
Remove and discard gasket (33).
(15) If necessary, remove three studs
(34) from front housing plate (6).
(16) If necessary, remove plug (35)
from front housing plate (6).
b. Installation
(1) If plug (35) was removed, install
it in front housing plate (6).
(2) If three studs (34) were removed,
install them in front housing
plate (6).
(3) Install a new gasket (22) on
front housing plate (6). Cut the
gasket even with the bottom face
of the cylinder block. Put
gasket cement on the bottom of
the gasket where it makes contact
with the gasket of the oil pan
plate.
(4) Install a new gasket (33) on back
of front housing plate (6).
3-91
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals