 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
WINCH ASSEMBLY REPAIR - CONTINUED
0245 19
ASSEMBLY - CONTINUED
Install Planetary Carrier.
6.
a.
b.
Install gear (147) and two thrust washers (149) in planetary carrier (140).
c.
Install shaft (146) in planetary carrier (140). Align pin hole in shaft with pin hole in planetary carrier.
d.
Install pin (145) in planetary carrier (140) and shaft (146).
e.
Repeat steps a through d for three remaining gear (147) sets.
f.
Position ring gear (144) on bearing cage (143).
g.
Install four plates (142) to bearing cage (143) with eight bolts (141). Tighten bolts to 36 lb-ft (49 Nm).
h.
Install planetary carrier (140) assembly inside ring gear (144).
i.
Install drive gear (139) and bearing race (150) on planetary carrier (140).
j.
Install bearing (135) in bearing cover (134).
k.
Install new seal (136) on bearing cover (134).
l.
Install new seal (138) and sight gage (137) to bearing cover (134).
m.
Use guide pins to position bearing cover (134) on case (5).
n.
Install six new lockwashers (133) and capscrews (132). Remove guide pins and install remaining two new lock-
washers and capscrews. Tighten capscrews to 36 lb-ft (49 Nm).
138
134
137
136
133
139
132
135
150
140
141
145
5
146
149
148
147
142
148
149
144
143
421-0218
0245 19-35
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals