ASSEMBLY - CONTINUED - TM-5-2410-237-231525

TM 5-2410-237-23

WINCH ASSEMBLY REPAIR - CONTINUED

0245 19

ASSEMBLY - CONTINUED

ar.

Install bearing cup (171) in manifold (156). Install bearing cup (172) in retainer (166). Install bearing cones (169

and 170) in manifold.

as.

Install retainer (166) and tighten four bolts (165) to 36 lb-ft (49 Nm).

NOTE

Ensure seal ring gaps are staggered and each seal ring is locked in place.

at.

Install three new seal rings (174) in seal carrier (173) and install seal carrier in manifold (156).

au. Install bearing cage (143) in case (5). Use a hoist to align bearing cage.

av.

Install manifold (156) on clutch shaft (155). Do NOT install new shims (168) at this time.

aw. Install four (of nine) bolts (167) in manifold (156). Do NOT tighten bolts.

ax. Install bearing cage (116) to case (5) with three bolts (115). Do NOT install new shims (117) at this time.

ay.

Tighten three bolts (115) on bearing cage (116) until pinion gear (127) slides between bevel gears (200) on clutch

assemblies and moves clutch shaft (155) to centered position.

143

166

160

172

158

157 159

170

169

171

168

162

127

117

161

162

165

156

117

155

173

116

164 174 167

163

115

421-0373

200

0245 19-27

Change 1