 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRANSMISSION ASSEMBLY REPAIR - CONTINUED
0245 15
DISASSEMBLY - CONTINUED
42.
Remove split ring (73) that retains bearing (74) in
73
bearing cage (72). Discard split ring.
43.
Remove bearing (74) from bearing cage (72).
72
74
421-0203
NOTE
Indentify each clutch housing for correct installation and alignment at assembly.
44.
Remove seven long capscrews (75) and washers (76) from No. 1 clutch housing (77).
45.
Mark near two holes that have short capscrews (78). Remove two capscrews and washers (79).
46.
Install two clamps (WP 0244 01) to retain piston (80) in No. 1 clutch housing (77).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.
NOTE
Weight of clutch housing is 55 lb (25 kg).
47.
Install two lifting links in No. 1 clutch housing (77) with 1/2-13NC bolts, attach lifting device and remove clutch hous-
ing assembly.
48.
Turn No. 1 clutch housing (77) over and remove clamps (WP 0244 01).
79
LIFTING
78
77
CLAMPS
EYES
77
75
80 (HIDDEN)
76
421-0204
421-0205
Change 1
0245 15-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals