 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
GOVERNOR REPAIR - CONTINUED
0245 12
DISASSEMBLY - CONTINUED
40.
Remove four bolts (97) and carrier (98).
101
98
100
41.
Remove four dowels (99), flyweights (100) and gover-
99
nor shaft (101).
102
103
42.
Remove dowel (102) from shaft (101).
104
43.
Separate races (103) from bearing (104).
97
421-0234
CLEANING AND INSPECTION
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic
material. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in
well-ventilated areas. Keep away from open flames and other sources of ignition. Failure to follow this
warning may cause injury or death.
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure
when drying parts with compressed air. DO NOT direct compressed air against human skin. Failure to
follow this warning may result in injury. Make sure air stream is directed away from user and other
personnel in the area. To prevent injury, user must wear protective goggles or face shield.
1.
Clean all parts in solvent cleaning compound.
2.
Thoroughly dry all parts with compressed air.
3.
Inspect parts for cracks, breaks, distortion or other damage IAW WP 0241 00.
4.
Replace damaged parts.
Change 1
0245 12-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals