 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
FUEL INJECTION PUMP HOUSING REPAIR - CONTINUED
0245 11
ASSEMBLY - CONTINUED
NOTE
Bushing driver set spacer has inside diameter of 1.50 in. (38.1 mm) and 1.250 in. (31.75 mm) length.
11.
Use bushing driver set spacer to install washer (9) against seat on camshaft (8).
12.
Install new snap ring (7). The camshaft must have end play of 0.0112 0.0093 in. (0.284 0.236 mm) when washer is
pushed against camshaft shoulder.
NOTE
Inspect original lifters and replace if necessary. If original lifters are being reused, place in the original loca-
tions. New lifters are identical and can be placed in any location.
13.
Align groove in lifter (6) with pin in fuel injection pump housing (5). Install six lifters in fuel injection pump housing.
14.
Install fuel rack (4) with groove of rack aligned with tab of bearing (10).
15.
Install new gasket (3), cover (2) and mounting bolts (1).
16.
Assemble governor (WP 0245 10).
17.
Install fuel injection pumps (WP 0245 09).
18.
Install fuel injection housing (WP 0055 00).
3
2
6
1
7
10
9
8
11
13
DRIVE
4
END
GOVERNOR
END
5
421-0171
12
END OF WORK PACKAGE
Change 1
0245 11-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals