 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
0245 04
REMOVAL - CONTINUED
CAUTION
Place antiseizing tape over threads of connect-
ing rod bolts. This will prevent damage to the
crankshaft when the rods are removed.
Tag each piston and rod assembly and the cyl-
4
inder. Each piston and rod assembly must go
back in the cylinder it was removed from.
Be careful not to damage the crankshaft or the
5
cylinder wall liners while removing connecting
rods and pistons. Damage of these components
could result in premature engine failure.
4.
Slide connecting rod and piston assembly (4) up
through cylinder block liners and remove from engine.
Remove upper bearing shell half (5). Discard upper
4
bearing shell half.
421-0098
5.
Repeat steps 1 through 4 for remaining pistons.
12
6
DISASSEMBLY
1.
Use piston ring expander to remove three piston rings
(6, 7 and 8) from piston (9). Discard piston rings.
7
2.
Remove retaining rings (10), piston pin (11), and con-
necting rod (12) from piston (9). Discard retaining
rings.
8
9
0
11
421-0099
0245 04-3
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals