 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
CYLINDER LINERS REPLACEMENT - CONTINUED
0245 02
CAUTION
Use caution to ensure components of cylinder block do not become contaminated. Keep work area clean.
Ensure crankshaft bearing journals are covered to protect from dirt, water and solvent cleaning compound.
Contamination of cylinder block components could result in premature engine failure.
NOTE
Use the following procedure for each of six cylinder liners.
REMOVAL
3
1.
Use cylinder liner puller, bridge and socket to remove
cylinder liner (1) from cylinder block (2).
2.
Remove one gasket (3) and three preformed packings
1
(4) from cylinder liner (1). Discard liner, gasket and
2
preformed packings.
3.
Repeat steps 1 and 2 to remove five remaining cylin-
4
der liners (1) from cylinder block (2).
421-0016
CLEANING AND INSPECTION
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-
rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-venti-
lated areas. Keep away from open flames and other sources of ignition. Failure to follow this warning may
cause injury or death.
CAUTION
Use caution to ensure components of cylinder block do not become contaminated. Keep work area clean.
Ensure crankshaft bearing journals are covered to protect from dirt, water and solvent cleaning compound.
Contamination of cylinder block components could result in premature engine failure.
1.
Clean cylinder liners and cylinder bores in cylinder block with solvent cleaning compound. Dry thoroughly with a clean
lint-free cloth. Ensure cylinder liner flanges are clean.
Change 1
0245 02-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals