 |
|||
|
|
|||
|
Page Title:
A/C UNIT INSTALLATION - CONTINUED |
|
||
| ||||||||||
|
|
 TM 5-2410-237-23
AIR CONDITIONING INSTALLATION INSTRUCTIONS - CONTINUED
0229 03
A/C UNIT INSTALLATION - CONTINUED
34.
Install compressor (38) assembly. Refer to A/C Com-
40
pressor Installation in this work package.
37
39
35.
Connect 7T5181 harness assembly (37) to compressor
(38).
36.
Connect 4R9940 harness assembly (39) to 7T5181
harness assembly (37).
42
37.
Place clip (40) over connection of 7T5181 harness
assembly (37) and 4R9940 harness assembly (39).
38.
Route white wire of 4R9940 harness assembly (39) to
dash. Use 8L8413 straps (41) to secure as required.
39.
Connect black wire of 4R9940 harness assembly (39)
38
to existing 3/8 in. bolt (42) grounding.
41
40.
Cut to length and butt-splice white wire from 4R9940
421-0335
harness assembly (39) to provided white wire (20 ft)
located behind dash from step 33.
NOTE
Only hand-tighten bolts and nuts on following four plates and brackets.
41.
Install front protection plate (43) with 6 (1/2-13 x 1-3/
43
49 48
4 in.) bolts (44), 6 (1/2-13) nuts (45) and 12 washers
(46) along bottom of plate.
47
42.
Install angle assembly (47) at each end of front protec-
tion plate (43) using four (1/2-13 x 1-3/8 in.) bolts (48)
and washers (49).
44
46
421-0336
45
Change 1
0229 03-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals