 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE LIFT CYLINDER REPAIR - CONTINUED
0221 00
DISASSEMBLY
NOTE
Prior to disassembly of lift cylinder, inspect external casing of lift cylinder for serviceability (cracks and
other damage). If not serviceable, replace lift cylinder.
1.
Scribe a mark on head (1) and cylinder housing (2) for correct alignment at assembly.
2.
Remove four bolts (3) and washers (4) from head (1).
3.
Pull piston rod (5) with piston assembly slowly from cylinder housing (2) to allow oil to escape.
4.
Inspect two bearing sleeves (6) for serviceability. Bearing sleeves lift cylinder if not serviceable.
CAUTION
Protect piston rod and use care when placing into vise.
5.
Place piston rod (5) into vise and remove self-locking nut (7) and washer (8) from piston rod. Discard self-locking nut.
6.
Remove piston (9) from piston rod (5).
6
6
2
7
8
9
5
1
4
387-718
3
0221 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals