Click here to make tpub.com your Home Page

Page Title: INSTALLATION AND ADJUSTMENT
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home
   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 5-2410-237-23
BLADE TILT ADJUSTABLE BRACE REPLACEMENT - CONTINUED
0211 00
INSTALLATION AND ADJUSTMENT
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Blade tilt adjustable brace weighs 115 lb (52 kg).
1.
Use nylon sling and suitable lifting device to position brace (1) at pusharm (7). Install eye bolt (4) with pin (6) and new
cotter pin (5).
2.
Lengthen brace (1) as needed and adjust lifting device.
3.
Install ball joint socket (9) to bulldozer blade (3) with four bolts (8). Do NOT install shims (10). Tighten bolts evenly.
4.
Measure gap between ball joint socket (9) and bulldozer blade (3) without shims (10).
5.
Remove four bolts (8) and shorten brace (1). Install shims (10) equal in thickness of measured gap plus add ONE shim.
6.
Lenghten brace (1) and install four bolts (8).
7.
Apply GAA grease to ball and socket (9) grease fitting.
8.
Check bulldozer blade for proper operation.
END OF WORK PACKAGE
0211 00-3

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business