CLEANING AND INSPECTION - TM-5-2410-237-231092

TM 5-2410-237-23

BLADE TILT CYLINDER REPAIR - CONTINUED

0210 00

CLEANING AND INSPECTION

WARNING

Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-

rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-venti-

lated areas. Keep away from open flames and other sources of ignition.

Clean all sealing surfaces and tube assembly connections with solvent cleaning compound and allow to dry.

Inspect internal casing of cylinder and internal parts of cylinder for cracks, wear, scoring or other damage. If compo-

nents are not serviceable, replace tilt cylinder.

Ensure mating surfaces for bearing sleeves are clean and not damaged.

ASSEMBLY

NOTE

Lightly coat bearing sleeves, new O-ring, new backup ring, new piston ring and new seals with clean oil

before assembly.

Ensure new seal faces toward cylinder housing when installed.

Install new piston ring (17), new seal (16) and washer (15) on piston (7).

387-655

0210 00-4