BLADE TILT CYLINDER REPAIR - TM-5-2410-237-231089

TM 5-2410-237-23

BLADE TILT CYLINDER REPAIR

0210 00

THIS WORK PACKAGE COVERS

Disassembly, Cleaning and Inspection, Assembly

INITIAL SETUP

Tools and Special Tools

Materials/Parts - Continued

Tool kit, general mechanic's (Item 122, WP 0250

Nut, self-locking (8)

O-ring (13)

Shop equipment, general purpose repair (Item 103,

Ring, backup (14)

Guide, seal (Item 33, WP 0250 00)

Ring, piston (17)

Inserter, seal (Item 40, WP 0250 00)

Materials/Parts

Seal (10, 11, 12 and 16)

Cap set, protective (Item 2, WP 0249 00)

Personnel Required

Cleaning compound, solvent (Item 4, WP 0249 00)

Cloth, abrasive, emery (Item 5, WP 0249 00)

Two

Oil, lubricating (Item 23, 24 or 25, WP 0249 00)

Equipment Condition

Rag, wiping (Item 29, WP 0249 00)

Blade tilt cylinder removed (WP 0209 00)

Sealant, repair kit (Item 30, WP 0249 00)

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to

personnel.

CAUTION

Wipe area clean around all hydraulic connections to be opened during disassembly. Install protective caps

and plugs as needed. Contamination of hydraulic system could result in premature failure.

NOTE

Use a suitable container to catch any hydraulic oil that may drain from cylinder. Dispose of oil IAW

local policy and ordinances. Ensure all spills are cleaned up.

Tilt cylinder weighs 248 lb (112 kg).

0210 00-1