 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE QUICK DROP VALVE MAINTENANCE - CONTINUED
0202 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Failure to follow this warning may result in injury.
NOTE
Quick drop valve and tube assembly weighs 38 lb (17 kg).
WARNING
Wipe all connectors and sealing surfaces clean and dry before installation, to prevent contamination from
entering hydraulic system.
1.
Position quick drop valve (15) and tube assembly (16) on lift cylinder (17) and install two new lockwashers (14) and
bolts (13). Tighten bolts to 118 lb-ft (160 Nm).
2.
Check sleeve (26) to ensure it moves freely.
3.
Connect lift cylinder lines (11 and 12) with new O-rings using four half flanges (10), eight new lockwashers (9) and
bolts (8).
4.
Place clamp (7) in position and install washer (6) and bolt (5).
5.
Install new O-ring (4) and tube assembly (3) with two new lockwasher (2) and bolts (1). Tighten bolts to 60 lb-ft (
81 Nm).
12
5,6
11
1,2
8,9
7
4 (HIDDEN)
15
26 (HIDDEN)
8,9
3
10
16
13,14
17
387-601
6.
Check level of oil in hydraulic tank. Add oil as needed and bleed air from system (WP 0225 00).
7.
Operate tractor and check for proper operation and leaks (TM 5-2410-237-10).
END OF WORK PACKAGE
0202 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals