 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE CONTROL VALVE (LIFT AND TILT) REPLACEMENT - CONTINUED
0201 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Blade control valve assembly weighs approximately 150 lb (68 kg).
5.
Attach nylon sling and suitable lifting device to blade control valve (1). Use lifting device to position blade control
valve to hydraulic tank (2).
6.
Install lower bracket (18) on hydraulic tank (2) with two capscrews (16) and washers (17).
7.
Install upper bracket (15) to hydraulic tank (2) with two capscrews (13) and washers (14).
8.
Install manifold (12) to hydraulic tank (2) with four capscrews (11).
11
15
12
13
14
2
16
17
18
387-589
0201 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals