Click here to make tpub.com your Home Page

Page Title: REMOVAL
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home
   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 5-2410-237-23
WINCH LINES AND FITTINGS REPLACEMENT - CONTINUED
0190 00
REMOVAL - CONTINUED
NOTE
Use a suitable container to capture any oil that may drain from lines. Dispose of oil IAW local policy
and ordinances. Ensure all spills are cleaned up.
Tag lines to ensure correct installation.
2.
Disconnect hose (1) from connector (2) at winch gear pump. Remove connector. Remove and discard O-ring (3) from
connector.
3.
Disconnect hose (4) from connector (5) at winch gear pump. Remove connector. Remove and discard O-ring (6) from
connector.
4.
Disconnect hose (1) from connector (7) located at winch control valve. Remove connector. Remove and discard O-ring
(8) from connector.
5.
Remove four bolts (9), washers (10) and two split flanges (11) to disconnect hose (4) from winch magnetic strainer
assembly housing. Remove and discard O-ring (12) from end of hose.
6.
Remove capscrew (13), lockwasher (14), nut (15) and clip (16) with hose (4) from bracket (17). Discard lockwasher.
7.
Remove capscrew (18), spacer (19) and clip (20) from hose (1).
8.
Remove hoses (1 and 4) from machine. Cut three straps (21) from hoses. Discard straps.
20
1
3
17
2
18,19
6
13,14,15
TO MAGNETIC
STRAINER
9,10
6
5
4
12
11
21
16
TO PUMP
8
7
TO CONTROL VALVE
387-544
INSTALLATION
CAUTION
Remove caps and/or plugs and wipe components clean to prevent contamination of winch.
NOTE
Lightly coat new O-rings with clean oil before installation.
1.
Position hoses (1 and 4) between connection points on machine.
2.
Install connector (2) with new O-ring (3) into winch gear pump.
3.
Connect hose (1) to connector (2).
4.
Install connector (5) with new O-ring (6) into winch gear pump.
5.
Connect hose (4) to connector (5).
0190 00-2

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business