 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
WINCH MAGNETIC STRAINER ASSEMBLY MAINTENANCE - CONTINUED
0184 00
INSTALLATION
NOTE
Lightly coat new O-rings with clean oil before installation.
Ensure mating surfaces are clean.
1.
Install new O-ring (17) on base of magnetic strainer assembly (16).
2.
Position magnetic strainer assembly (16) on winch
2
cover. Install two washers (15) and nuts (14). Install
1
two washers (13) and bolts (12). Tighten nuts and
16
bolts to 40 lb-ft (54 Nm).
10,11
3.
Install new O-ring (11), hose (10) and two split flanges
12,13
(9) on magnetic strainer assembly (16) with four
washers (8) and bolts (7).
4.
Run engine at low idle. Ensure oil is visible in sight
gage. Add oil if necessary (WP 0179 00).
5.
Check winch for leaks and proper operation (TM 5-
2410-237-10).
7,8
387-485
14,15
17 (HIDDEN)
9
END OF WORK PACKAGE
0184 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals