 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
WINCH ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts - Continued
Applicable Configuration
Lockwasher (4 and 6)
Tractor with winch
Nut, self-locking (11 and 15)
Tools and Special Tools
O-ring (10, 23, 30 and 32)
Tool kit, general mechanic's (Item 122, WP 0250
Personnel Required
Three
Shop equipment, common no. 2 (Item 104, WP
0250)
References
Link, lifting (Item 51, WP 0250 00)
TM 5-2410-237-10
Lifting equipment, 2 ton capacity
TM 5-2410-237-23P
Wood cribbing, 4 ft x 4 in. x 4 in.
Bolt, 3/4-10 x 1-1/2 in.
Materials/Parts
Equipment Condition
Oil, lubricating (Item 23, 24, 25 or 26, WP 0249 00)
Machine parked on level ground (TM 5-2410-237-
Rag, wiping (Item 29, WP 0249 00)
10)
Tag, marker (Item 37, WP 0249 00)
Winch wire rope assembly removed, as required
Wire, nonelectrical (Item 40, WP 0249 00)
Winch oil drained (WP 0179 00)
Gasket (9)
REMOVAL
1.
Clean external surfaces of winch to remove accumulated grease and dirt.
NOTE
Tag hoses before removed to ensure correct installation.
Use a suitable container to catch any oil that may drain from system. Dispose of oil IAW local policy
and ordinances. Ensure all spills are cleaned up.
Use two wrenches when disconnecting hose connections.
Tractor will be immobilized when winch is removed. If tractor must be moved, perform the following
step to isolate winch gear pump.
2.
Remove winch gear pump from rear of engine auxiliary drive (WP 0189 00). Cover opening where pump was removed
with plate that is listed and illustrated in TM 5-2410-237-23P.
3.
Remove winch control valve (WP 0181 00).
4.
Remove winch magnetic strainer assembly (WP 0184 00). Wire magnetic strainer assembly up and out of the way.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals