Click here to make tpub.com your Home Page

Page Title: DISASSEMBLY (Cont)
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home
   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 5-2410-237-23
WINTERIZED CAB MAINTENANCE - CONTINUED
0168 00
DISASSEMBLY - CONTINUED
26.
On L.H. side panel (52) loosen knobs (63).
66
67
27.
Remove four capscrews (64) and panel (65) from L.H.
side panel (52).
28.
Loosen knobs (66) and remove panel (67) from L.H.
side panel (52).
52
64
65
63
387-305
ASSEMBLY
NOTE
Use silicone-based sealant on all mating surfaces.
1.
Place panel (67) in position on L.H. side panel (52). Tighten knobs (66).
2.
Install panel (65) with four capscrews (64) to L.H. side panel (52). Tighten knobs (63).
3.
On R.H. side panel (52), install new gasket (61) and plate (62) with four capscrews (59) and washers (60).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Weight of cab with ROPS is 3,000 lb (1,362 kg).
Support rear feet with wood cribbing to level ROPS canopy when resting winterized cab on ground.
Follow steps 4 through 6 for installation of either L.H. or R.H. side panel (52).
0168 00-9

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business