 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
PROTECTIVE SCREEN REPLACEMENT - CONTINUED
0167 00
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Screen weighs 60 lb (27 kg).
Screen mounting hardware may vary from one machine to another.
1.
Attach a nylon sling and a suitable lifting device to screen (1). Take up all slack in sling.
2.
Remove two bolts (2) and washers (3) at top of screen (1).
3.
Remove two bolts (4) and washers (5) at bottom of screen (1) and remove screen from four angle brackets that are
welded to ROPS (6).
NOTE
If angle brackets are damaged, they may be replaced by Direct Support Maintenance IAW welding instruc-
tions in WP 0166 00.
INSTALLATION
NOTE
Apply antiseize compound to mounting bolts before installation.
1.
Attach a nylon sling and suitable lifting device to
2,3
screen (1) and position screen on ROPS (6). Install
two bolts (4) and washers (5) at bottom of screen.
2.
Install two bolts (2) and washers (3) at top of screen
(1).
1
6
4,5
387-296
END OF WORK PACKAGE
0167 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals