 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
ROPS MOUNTING BRACKETS AND PLATES REPLACEMENT - CONTINUED
0165 00
INSTALLATION - CONTINUED
NOTE
L.H. plate weighs 48 lb (22 kg).
9.
Use a nylon sling and a suitable lifting device to position L.H. plate (11) to left rear side of machine.
10.
Install L.H. plate (11) on block (16) with three capscrews (12) and washers (13). Do NOT tighten capscrews.
11.
Install L.H. plate (11) with six capscrews (5) and washers (6).
12.
Tighten nine capscrews (5 and 12).
13.
Install angle (10) to right rear of machine with two capscrews (8), four washers (9) and two nuts (7).
NOTE
R.H. plate weighs 51 lb (23 kg).
14.
Use a nylon sling and a suitable lifting device to position R.H. plate (1) to right rear of machine.
15.
Install R.H. plate (1) on angle (10) with three capscrews (4), six washers (3) and three nuts (2). Do NOT tighten cap-
screws.
16.
Install six capscrews (5) and washers (6).
17.
Tighten nine capscrews (4 and 5).
1
3 2
10
6
8
5
9
7
4 3
387-278
18.
Install backup alarm (WP 0098 00).
19.
Install rear floodlamp (WP 0093 00).
20.
Install ROPS (WP 0164 00).
END OF WORK PACKAGE
0165 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals