 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRACK ROLLER GUARDS REPLACEMENT - CONTINUED
0162 001.
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Failure to follow this warning may result in injury or death to personnel.
NOTE
Outer guards weigh 88 lb (40 kg) each.
R.H. inner guard weighs 98 lb (44 kg).
L.H. inner guard weighs 120 lb (54 kg).
Right-side inner and outer track roller guards are shown. Left-side inner and outer track roller guards
are replaced the same way.
1.
Remove two bolts (1), lockwashers (2) and retainer (3) from each end of the outer guard (4). Discard lockwashers.
2.
Remove five nuts (5) and lockwashers (6). Push five rods (7) through outer guard (4). Discard lockwashers.
3.
Place wooden blocks between track assembly and outer guard (4) at each end.
4.
Remove five capscrews (8) and spacers (9) that hold outer guard (4) to track roller frame. Use capscrews to lower outer
guard onto wooden blocks. Remove outer guard.
5.
Remove five rods (7) from inner guard (10). If required, remove nut (11) and lockwasher (12) from each of five rods.
Remove five spacers (13) from inner guard. Discard lockwashers.
6.
Place wooden blocks between track assembly and inner guard (10) at each end.
7.
Remove two bolts (1), lockwashers (2) and retainer (3) at forward end of inner guard (10) to track roller frame. Discard
lockwashers.
8.
Remove six capscrews (8) and spacers (9) that hold inner guard (10) to track roller frame. Use capscrews to lower inner
guard onto wooden blocks. Remove inner guard.
12
11
13
10
3
4
6
7
9
3
5
8
1
2
387-324
0162 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals