 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
RADIATOR GUARD REPLACEMENT - CONTINUED
0158 00
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Guard weighs 157 lb (71 kg).
1.
Position hydraulic floor jack underneath guard (1) and raise jack to support guard.
2.
Remove four capscrews (2) and washers (3) from underneath guard (1).
3.
Remove six capscrews (4), washers (5) and shims (6), if used. Lower hydraulic floor jack to remove guard (1) from
guard (7).
NOTE
Guard weighs 790 lb (359 kg).
4.
Attach a nylon sling and a suitable lifting device to guard (7).
5.
Remove seven nuts (8), 14 washers (9) and seven capscrews (10) from one side of guard (7).
6.
Repeat step 5 on other side of guard (7).
7.
Use lifting device to carefully lift guard (7) off tractor.
7
8
9
9
10
6
5
4
1
3
387-513
2
0158 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals