 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
STEERING CLUTCH CONTROL VALVE MAINTENANCE - CONTINUED
0154 00
DISASSEMBLY - CONTINUED
12.
Remove capscrew (54), lever (55) and remove key
54
(56) from shaft (57) in lever housing (32).
13.
Repeat step 12 on other shaft (57).
14.
Loosen two capscrews (58) in levers (59) inside lever
57
housing (32).
15.
Tap end of shaft (57) with soft hammer to remove
bearing (60) and spacer (61) from lever housing (32)
32
at opposite end of shaft.
55
56
61
60
58
59
387-740
16.
Remove retaining ring (62) from shaft (57).
17.
Remove shaft (57), washer (63), key (64) and lever (59) from lever housing (32).
18.
Repeat steps 15 through 17 for other shaft (57).
19.
Remove two seals (65) and bearings (66) from shaft openings in lever housing (32). Discard seals.
20.
Remove cotter pin (67), roller (68) and pin (69) from lever (59). Discard cotter pin.
21.
Repeat step 20 for other lever (59).
65
66
63
59
62
32
57
69
64
68
67
387-741
0154 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals