 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
STEERING CLUTCH MAINTENANCE - CONTINUED
0152 00
INSTALLATION
1.
Install two 3/8 in. -16 x 4 in. long capscrews (15) through brake band (10) clamps and secure capscrews with two 3/8 in.
-16 hex nuts (16).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Steering clutch assembly weighs approximately 175 lb (79 kg).
Ensure steering clutch stays level so that clutch does not come apart.
2.
Attach a nylon sling and suitable lifting device to cap-
4,14
screws (15) and lift steering clutch (13) into clutch
case between hub and flange.
3.
Put antiseize compound on threads of all capscrews (4
and 11).
4.
Install one capscrew (4) and washer (14) on hub side
of steering clutch (13). Tighten capscrew to 200 lb-ft
13
(271 Nm).
5.
Install one capscrew (11) and washer (12) on flange
15
side of steering clutch (13). Tighten capscrew to 200
lb-ft (271 Nm).
16
10
387-248
11,12 (HIDDEN)
0152 00-9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals