 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
STEERING BRAKE ACTUATING MECHANISM MAINTENANCE - CONTINUED
0150 00
DISASSEMBLY - CONTINUED
6.
At large hole in side of actuating mechanism (2), remove retaining ring (19) and pin (20) that connects two links (21),
links (22) and lever (23). If necessary, remove other retaining ring from pin.
7.
Remove spring pin (24), shaft (25) and bellcrank (14) from actuating mechanism (2). Discard spring pin.
8.
Remove cotter pin (26), pin (27) and lever (23) from bellcrank (14). Discard cotter pin.
9.
Remove bearing (28) from bellcrank (14).
19
22
28
14
26
27
21
23
21
20
24
22
25
2
387-696
NOTE
Turn actuating mechanism over on its side, with capscrews facing up, to complete disassembly.
10.
Flatten two locks (29) and remove two capscrews (30), one lock, shaft (31) and lever (32) from actuating mechanism
(2).
11.
Remove retaining ring (33), pin (34) and two links (21) from one end of lever (32). If necessary, remove other retaining
ring from pin.
12.
Remove retaining ring (35), pin (36) and strut (3) from other end of lever (32). If necessary, remove other retaining ring
from pin.
13.
Remove bearings (37, 38 and 39) from lever (32).
0150 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals