 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
STEERING CLUTCH LEVERS AND LINKAGE ADJUSTMENT - CONTINUED
0147 00
ADJUSTMENT - CONTINUED
2.
Loosen nut (6) and remove cotter pin (7) and pin (8) that connects rod end (9) to lever (10). Discard cotter pin.
3.
Push lever (10) all the way toward front of machine against bumper (11).
4.
Turn rod end (9) so that distance (A) between center line of steering clutch lever and face of dash is 2.50 in. +/- 0.12 in.
(6.35 cm +/- 0.30 cm)
5.
Install pin (8) and new cotter pin (7) to connect rod end (9) to lever (10).
6.
Tighten nut (6).
7.
Loosen nut (12) and turn rod (13) so that distance (B) between center line of pins is 18.50 in. +/- 0.02 in. (46.99 cm +/-
0.05 cm).
8.
Tighten nut (12).
9.
Loosen nut (14) and remove cotter pin (15) and pin (16) that connects rod end (17) to lever (18). Discard cotter pin.
10.
Pull rod (19) towards front of machine until a resistance is felt.
11.
Make adjustment to rod end (17) so that pin (16) can be installed through rod end into lever (18).
12.
Turn rod end (17) 1/2 turn so that length of rod (19) is made shorter.
13.
Put rod end (17) in position on lever (18) and install pin (16) and new cotter pin (15).
14.
Tighten nut (14).
STEERING CLUTCH
A
6 9 7,8
LEVER
11
13
10
19
B
12
18
14
17 15,16
387-333
0147 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals