Click here to make tpub.com your Home Page

Page Title: REMOVAL
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home
   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 5-2410-237-23
RECOIL SPRING REPLACEMENT - CONTINUED
0136 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Recoil spring weighs 300 lb (136 kg).
3.
Attach nylon sling and a suitable lifting device to recoil spring (6).
4.
Remove four capscrews (7), lockwashers (8) and spacers (9) from two stops (5). Discard lockwashers.
5.
Remove two front stops (5) and recoil spring (6) from track roller frame.
6
7,8
5
387-911
9 (HIDDEN)
387-345
INSTALLATION
WARNING
Recoil spring is under spring tension. Use extreme caution when assembling, to avoid injury or death.
Ensure press is equipped with guards to hold spring assembly in position while it is under compression.
1.
If recoil spring (6) is to be replaced, put recoil spring in a press and put spring under compression.
a.
Remove nut (3) and slowly release spring. Spring is under compression until length of spring is 31.61 in.
(80.29 cm).
b.
Put new spring in position and put spring under compression until distance (X) is 24.75 in. (62.87 cm). Tighten nut
(3) to hold spring and retainers.
0136 00-2

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business