 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
FINAL DRIVE PINIONS AND FLANGES MAINTENANCE - CONTINUED
0126 00
ASSEMBLY - CONTINUED
CAUTION
Duo-cone seal assembly is a two-piece seal. It must be used as a matched pair or failure will result. Do not
separate.
NOTE
After installation, apply clean oil to contact surfaces of metal seals.
5.
Install two new preformed packings (11) on duo-cone seal (10).
CAUTION
Seals and seal contact surfaces must be kept clean. Do not touch after being cleaned or leaks can result.
NOTE
Do not apply oil to preformed packings.
6.
Install duo-cone seal (10) with preformed packing (11) in bearing cage (4). Clean metal contact surface of seal, then
apply a thin film of clean oil to metal contact surface.
7.
Install duo-cone seal (10) with preformed packing (11) in flange (1). Clean metal contact surface of seal, then apply a
thin film of clean oil to metal contact surface.
8.
Clean and dry splines on shaft of final drive pinion (6).
1
7
11
4
6
2
8
9
11
0.12 IN. +/- 0.03 IN.
(3.15 MM +/- 0.80 MM)
10
6
1
387-781
0126 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals