 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRANSMISSION AND STEERING CLUTCH OIL FILTER ASSEMBLY MAINTENANCE- CONTINUED
0111 00
DISASSEMBLY
1.
Remove retainer (18), gasket (19) and spring (20) from inside of filter housing (3). Discard gasket.
2.
Remove plug (21) and O-ring (22) from cover (2). Discard O-ring.
3.
Use a hammer and punch to remove pin (23) from tube (24). Remove tube, retainer (25), spring (26) and retainer (27)
from cover (2).
4.
If necessary, remove four studs (28) from filter housing (3).
21
22
18
2
19
27
20
26
25
23
28
24
3
387-273
ASSEMBLY
1.
If removed, install four studs (28) into filter housing (3).
NOTE
Ensure pin is not damaged. If damaged, it must be replaced.
2.
Install retainer (27), spring (26), retainer (25) and tube (24) onto cover (2) and install pin (23) into tube.
3.
Lubricate new O-ring (22) with clean oil. Install plug (21) and O-ring into cover (2).
4.
Install spring (20), new gasket (19) and retainer (18) into filter housing (3).
0111 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals