 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
FAN AND FAN GUARD REPLACEMENT - CONTINUED
0073 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Fan weighs 58 lb (26 kg).
Prior to removal, note position of fan blades for correct installation.
5.
Secure fan (6) with a nylon sling and suitable lifting device.
6.
Remove eight capscrews (7) and washers (8).
7.
Remove fan (6) from hub (9).
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Fan weighs 58 lb (26 kg).
Ensure fan blades are oriented the same as noted during removal.
1.
Secure fan (6) with a nylon sling and attach sling to suitable lifting device. Lower fan into position at hub (9). Install
eight washers (8) and capscrews (7).
2.
Swing lower fan guard (3) down around fan and position on studs.
3.
Install upper fan guard (2) over fan on studs.
4.
Install lower fan guard (3) with six washers (5) and new self-locking nuts (4).
5.
Repeat step 4 for upper fan guard (2).
6.
Install four capscrews (1) attaching upper and lower fan guards (2 and 3).
7.
If removed, install radiator (WP 0068 00).
0073 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals