 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
MUFFLER REPLACEMENT - CONTINUED
0062 00
REMOVAL - CONTINUED
4.
Remove two capscrews (11) and separate dust ejector pipe (10) from bottom of muffler (4).
5.
To remove bottom clamp halves (3), remove four capscrews (12), nuts (13) and eight washers (14).
11
10
4
387-193
BOTTOM VIEW
387-194
3
12,13,14
15
INSTALLATION
1.
Position bottom clamp halves (3) on bracket (15) and install four capscrews (12), nuts (13) and eight washers (14).
2.
Position dust ejector pipe (10) on bottom of muffler (4). Install two capscrews (11).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Failure to follow this warning may cause injury.
3.
With assistance, place muffler (4) in position and slide
5,6
10
8
7
onto turbocharger coupling (9).
4
4.
Line up dust ejector hose (7) with precleaner body (8).
Tighten screw (5) on hose clamp (6).
5.
Install top clamp halves (3) on muffler (4) with four
capscrews (1) and nuts (2).
6.
Install hood (WP 0159 00).
7.
Install exhaust extension (WP 0063 00).
8.
Run engine and check muffler for evidence of leaks
(TM 5-2410-237-10).
387-927
3
1,2
9
END OF WORK PACKAGE
0062 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals