 |
|||
|
|
|||
|
Page Title:
PRIMARY FUEL FILTER ASSEMBLY INSTALLATION |
|
||
| ||||||||||
|
|
 TM 5-2410-237-23
PRIMARY FUEL FILTER ASSEMBLY MAINTENANCE - CONTINUED
0059 00
PRIMARY FUEL FILTER ASSEMBLY - CONTINUED
3.
Install two plugs (17) and new O-rings (18) in filter base (4).
4.
Install valve assembly (16) into filter base (4).
5.
Install new preformed packing (15) onto nut (3). Place nut (3) into position and secure to filter base (4) with snap ring
(14).
PRIMARY FUEL FILTER ASSEMBLY INSTALLATION
1.
If support assembly (10) was removed, position support assembly and install six capscrews (11), washers (12) and nuts
(13) that secure supports to muffler and engine.
2.
Position filter base (4) on support assembly (10) and install two capscrews (7), four washers (8) and two nuts (9).
3.
Connect fuel lines to filter base (WP 0053 00).
11,12,13
7,8,9
10
4.
Install fuel priming pump (WP 0041 00).
5.
Install filter element and filter case. See Filter Element
Service in this work package.
6.
Turn fuel shutoff valve (1) to the ON position
7.
Prime fuel system (WP 0041 00).
8.
Check for any leaks by visually inspecting the area.
9.
Run engine and check for proper operation and fuel
leaks (TM 5-2410-237-10).
11,12,13
4
387-216
END OF WORK PACKAGE
0059 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals