 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
GOVERNOR CONTROLS AND LINKAGE MAINTENANCE - CONTINUED
0058 00
REMOVAL - CONTINUED
17.
Remove nut (43), capscrew (44), two washers (45) and one end of rod (46) assembly from bellcrank (39).
NOTE
Items are removed from lever (52) when repeating step 17.
18.
Repeat step 17 at other end of rod (46) assembly and remove rod.
19.
Loosen jam nut (47) at each end of rod (46) assembly. Remove two rod ends (48) and jam nuts from rod.
20.
Remove nut (49), two washers (50) and capscrew (51) from lever (52).
21.
Remove lever (52) from shaft on governor.
22.
Remove capscrew (22), lower end of rod (24) and washer (53) from bellcrank (54).
23.
Loosen two jam nuts (55) and remove two rod ends (56) and jam nuts from rod (24).
24.
Remove capscrew (57), washer (58) and lock (59) from side of bellcrank mounting bracket (60).
25.
Remove shaft (61), bellcrank (39) and bellcrank (54) from bracket (60).
26.
Remove two bearings (62) from bellcrank (54).
27.
Remove two bearings (63), capscrew (64) and nut (65) from bellcrank (39).
28.
Remove three capscrews (66), washers (67) and bracket (60) from flywheel housing.
56
55
24
60
67 66
56
55
DASH
59
44
53
AREA
22
62
57 58
DASH
45
ASSY
54
39
63
44
63 62
MOUNTED ON
48
FLYWHEEL
45
61
49
47
50
HOUSING
65
52
MOUNTED ON
64
GOVERNOR
43
50 51
47
46
43
48
387-427
0058 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals