 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
GOVERNOR AND FUEL INJECTION PUMP HOUSING REPLACEMENT - CONTINUED
0055 00
INSTALLATION - CONTINUED
8.
Remove timing pin and install new gasket (15) and timing cover (14) to governor and fuel injection pump housing (10)
with four bolts (13).
14
13
15
387-925
10
9.
Install new gasket (4), pump drive gear cover (3), six washers (2) and nuts (1).
10.
Install tachometer drive (WP 0230 00).
11.
Install secondary fuel filter assembly (WP 0060 00).
12.
Install turbocharger drain tube (WP 0051 00).
13.
Install primary fuel filter assembly (WP 0059 00).
14.
Install V-belts and tighten alternator (WP 0076 00).
15.
Connect fuel return line (WP 0053 00).
16.
Connect governor control linkage (WP 0058 00).
17.
Install fuel injection lines (WP 0044 00).
18.
Turn fuel shutoff valve under fuel tank to ON position (WP 0042 00).
19.
Install hood (WP 0159 00).
20.
Place battery disconnect switch in ON position (TM 5-2410-237-10).
21.
Operate machine and check for proper operation and fuel leaks at governor and fuel injection pump housing (10).
22.
Adjust fuel injector pump and governor if necessary (WP 0057 00).
23.
Operate tractor and check for proper operation (TM 5-2410-237-10).
END OF WORK PACKAGE
0055 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals