Click here to make tpub.com your Home Page

Page Title: REMOVAL - CONTINUED
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home
   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 5-2410-237-23
FUEL INJECTION LINES AND FITTINGS REPLACEMENT - CONTINUED
0044 00
REMOVAL - CONTINUED
11.
Remove five bolts (14) and clamps (15) from two fuel lines (19) at center of engine.
12.
Repeat steps 9 and 10 for two fuel lines (19).
13.
Remove three bolts (14) and clamps (15) from two fuel lines (20) at front of engine.
14.
Repeat steps 9 and 10 for fuel lines (20).
14
15
20
19
387-197
INSTALLATION
CAUTION
Make sure fuel injection lines are clean and dry. Remove plugs and caps only as lines are installed to
prevent dirt from getting into fuel system. Dirt can cause serious damage to engine.
Fuel injection nozzles can be permanently damaged if only one wrench is used to tighten fuel line nuts.
Use one wrench to hold nozzle and a second wrench to tighten nut.
NOTE
Tighten nuts on both ends of fuel injection lines to 30 lb-ft (41 Nm).
1.
Install two fuel lines (20) on two injectors (18) at front of engine.
2.
Install other ends of two fuel lines (20) on fuel injection pumps (17).
3.
Install three clamps (15) and bolts (14) on two fuel lines (20).
4.
Repeat steps 1 and 2 for two fuel lines (19) at center of engine.
5.
Install five clamps (15) and bolts (14) on fuel lines (19).
0044 00-3

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business